Comparison

The 3 type of hydroblast method for business

SURFACE PREPARATION

The details of surface part of where to clean.

Hydroblast

Keep surface original rough.
Keep profile of steel original, avoid hiding fouling after painting.

Advantage of waterblast

High pressure is the unique way to achieve SC-2 stand by single process.
1. Chloride<7ug/ cm²
2. Ferrous ions<10 ug/cm²
3. Sulfate<17 ug/cm²
Keep profile of steel original, avoid hiding fouling after painting.
Profile of steel will be changed and the fouling will be hidden on surface.

Effect of sandblast and hydroblast

Microscope image on right: pockets and holes prior to treatment(indicated by yellow arrows).Blasting material residue and slag after sandblast  (green arrows). Wavelike substrate deformations(violet circles). Slat residue(white bits). Pitted material(red arrows).
Microscope image on right: the pockets and holes prior to treatment(circled blue) are cleaned by high pressure waterjet, removing all impurities from them and from the surface. The residual chloride levels are at least 5 times lower than on a grit blasted surface and the substrate profile  remains intact ensuring good adhesion of the new coating and greatly reducing the risk of future paint film defects.

Comparing

Sandblast: The residue from sandblasting needs to be removed.
Hydroblast: Water Saving and residue 98.5% off by waterblast.

Fully Auto Swing Arm Climbing Robot

  • Safe, clean and efficient one man operation.

  • Wireless remote controlled operating system.

  • Eliminates access needs(staging, cranes,etc.).

  • Full service package.

  • Removal of industrial coating and marine corrosion.

  • Various standard & custom engineered applications.

  • All horizontal, overhead and vertical surfaces are easily accessible.

  • Easily convertible to vacuum recovery.

Features

The robot enable shipyards, off shore, petrochemical and wide range of other industries to clean steel surfaces. allowing other trades to simultaneously perform other maintenance procedures. The robot offers a significant advantage over the traditional methods to remove marine growth, industrial coatings and corrosion. The robot is designed for all horizontal, overhead and vertical steel cleaning, blasting or custom engineered applications. It is remotely controlled for operator safety, comfort and productivity. The light weight construction and quick (dis)connect systems reduce the buildup time to approximately 10 minutes. The robot adheres to the wall by a magnetic drive assembly and can be moved independently. There is no need for crane  assistance or cherry pickers.
Working width

Working width

Max 1.5m, online adjustable
Size

Size

950*930*620mm
Weight

Weight

62Kg
Max Speed

Max Speed

10m/min
Swing

Swing

Uniform Motion
Correct Deviation

Correct Deviation

Online Adjustable by Track

Electrical Driven

Electrical Control Box

Electrical Control Box

Stainless Steel IP66
 PowerSupply

PowerSupply

380V/50HZ/16A
Remote Control

Remote Control

128Bit Secured connection IP65 housing
Cable Length

Cable Length

50meter(Extendable)
Send a message
First Name*
Last Name*
Email*
Message*
Verification*
Verification Code